12" Cut 28hp Honda GLADIATOR Sawmill

IMG_1059.JPG
IMG_1060.JPG
IMG_1072.JPG
IMG_1073.JPG
IMG_1074.JPG
IMG_1076.JPG
IMG_1093.JPG
IMG_1095.JPG
IMG_1114.JPG
IMG_1076.JPG
IMG_1078.JPG
IMG_1093.JPG
IMG_1095.JPG
IMG_1059.JPG
IMG_1060.JPG
IMG_1072.JPG
IMG_1073.JPG
IMG_1074.JPG
IMG_1076.JPG
IMG_1093.JPG
IMG_1095.JPG
IMG_1114.JPG
IMG_1076.JPG
IMG_1078.JPG
IMG_1093.JPG
IMG_1095.JPG

12" Cut 28hp Honda GLADIATOR Sawmill

66,000.00

Complete 12" Cut Gladiator sawmill. Comes with 2 x blades and sharpener.

Operators position hydraulic controlled feed, blade swing and board return.

Single operator position Horizontal and vertical automated sizing.

12" x 12" standard cut. 12" x 24" double cut.

Log diameter 1.5m or 4.92ft (any size can be sawn with chocks).

Log length 6.1m or 20ft (extensions can be purchased - contact us).

COMPUTER SIZING STANDARD.

Note: Freight must be purchased in addition. Battery not included when exporting.

3 Crates 1100kg.

WHAT MAKES OUR MILLS STAND OUT AT THE VERY TOP

1) Open access to load your logs and remove timber (without the possibility of damaging your tracks. You're not stuck in a portal restricting your options.

2) The mono rail means you're mill will always pull straight - its not dependent on how or where you pull. It will cut straight no matter what.

3) Our mills now have a 40hp capacity heavy duty Curtis gearbox (made in the US). The driven pulley is also mounted on the other side of an outrigger bearing - meaning the pressure provided by the belt is off the gearbox. This is the number one fault with most swing blade sawmills.

4) We have full taper ability along with single end sizing options available making our mills very easy to align to the log and to set you're sizes.

5) Our mills are very light to push and pull. The other mills may look impressive in size but its certainly not fun pushing/pulling a tank all day.

6) The swing apparatus is effortless. We also have weather board options available to coincide with its simplicity.

7) All our mills have the ability to double cut straight off the log - no turning the mill around (its designed into the concept). Our mills don't require any 180 degree swing function - this facility has no relationship to any extra ability regarding double cutting so don't get caught out with this thinking!

8) Portability. Our mills can be provided with a simple dolly trailer system. They can also be transported via a small jockey arrangement. They do break down too. Lots of options for easy 10-30 minute setup/breakdown. Our chainsaw mills take portability to the next level.

9) A major hidden advantage with our saw is that there is no need to start vertical first followed by horizontal as your finishing cut. Simply start horizontal and finish with vertical - no wedging required. Just grab your sawn board and start again.

10) Sharpening takes literally seconds with our simple 4-tooth saw blade. This design means our mills put LESS strain on the blade prolonging the life of your gearbox, bearings and belts.

11) We have thin-kerf blade, slabber and planer blade attachments available for all mills. 

12) We will be offering insert tips by Simonds very soon (blades made in the US). This provides much more options whensawing domestic logs with the possibility of steel within them.

13) We have an amazing LOW COST automated swing blade available as a simple upgrade to the manual option.

14) Saw any diameter logs.

15) Price, production, simplicity and portability - you cant beat it!

Quantity:
Add To Cart
We try to keep within these specs.

We try to keep within these specs.